Before applying, test all inks and paints used on the magnet doe adhesion and solvent compatibility.
If possible, affix to smooth, flat or gently curved metallic surfaces.
Make sure the entire magnet is flat against the metal surfaces (i.e., no air pockets).
If you place the magnet in the wrong position, completely remove the magnet from the surface and reapply. Do not pull the magnet across the surface, or it may stretch due to resistance caused by high magnetic strength.
Failure to Follow Instructions may Result in Damage to Paint Surfaces and Other Surfaces.
Applying Flexible Magnet (cont'd)
Avoid use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods) or temperatures exceeding 150 F (66 C).
Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles) can result in uneven fading of the surface because the magnet-covered area is shielded from ultraviolet rays.
Avoid use on no metallic body fillers, simulated wood grain siding and reprinted surfaces.
Cleaning Flexible Magnet
To guard against moisture and dirt buildup between the magnet and the metal surface (particularly on outdoor applications), remove the magnet at regular intervals. Clean both the magnet and the metal surface with mild detergent; wipe with soft cloth or allow to air-dry. (For vehicle-mounted signs, remove and clean DAILY).
To protect fresh clear coat, base coat and/or vinyl surfaces on new cars and trucks, remove magnetic signs DAILY.
Proper Use and Care
Will extend the Life of Your Magnetic Products and Protect the Metallic Surface to which it is Applied.